Installation Overview

On the day of installation the installation engineer will liaise with your  ICT Coordinator  to confirm details as per survey or what was agreed verbally.

The interactive whiteboard will be fixed to the wall at the desired location and height from the floor.

The data cables from the interactive whiteboard to the PC will run in trunking usually to the bottom right or bottom left of the whiteboard in relation to the positioning of the lap top or pc and terminates at the junction boxes at this location. 

The projector must be securely fixed to the ceiling of the room  using the appropriate  mounting bracket. If a false ceiling is present, a hole will be cut in the ceiling tile, a trim plate fitted and a fixing pole of appropriate length passed through and attached to the bracket above maximum length we can install at is 3 meters . Typically, the bracket is fixed so the projector is approximately 2.1 to 3.5 meters from the interactive whiteboard.  The projector will be positioned no less than 2.4 meters from the floor and will sit secured using the appropriate fixing plate to the pole mount.

The data cables from the projector will either be contained in trunking along the ceiling or out of sight above any false ceiling. The cables will run vertically down the wall  in trunking to the termination boxes .

Speakers, if ordered, will be mounted either side of the interactive whiteboard. Cabling for the speakers will be run behind the board, and will be routed through the existing trunking (used for the whiteboard data cable) to the  speaker  termination faceplate. The amplifier or Video  will be positioned close to the PC, laptop.

All cabling will be securely contained in 16 mm x 25 mm white trunking.

The software for the interactive whiteboard will then be installed on the PC or Lap Top , in order to demonstrate the operation of the whiteboard, projector and the key elements of the interactive software. Please note, we do not install on to servers within networks if this required you need the appropriate software from the interactive board suppler and the administrator is required to be present.  Once all elements of the installation are finished, you will be requested for your signature on our sign off form with any comments.  This sign off is to indicate that you are satisfied with the installation.

E-mail: office@belainteractive.com